Uurwerk met tourbillon
J12 TOURBILLON
vergelijkbare video's
- TIJD INSTELLEN
- HORLOGE OPWINDEN
HET ONDERHOUD VAN UW HORLOGE
UURWERK
Met de hand opwindbaar mechanisch uurwerk
GANGRESERVE
100 Uur
HOE VAAK MOET HET ONDERHOUD VAN UW HORLOGE UITGEVOERD WORDEN?
Laat de waterbestendigheid om de 2 jaar controleren (of jaarlijks bij regelmatig contact met water)
Volledig onderhoud om de 4-5 jaar
Your watches water resistance features are engraved on the case back next to the fish marking.
This water resistance marking indicates the depth to which the movement is protected from dust, moisture, and any damage that may occur if it is submerged in water. Seals are used to make watches water resistant. To ensure continuous water resistance, we recommend replacing the seals every two years from the date of first use. It is also advisable to check the water resistance of your watch case every year if it has been exposed to seawater or pool water for long periods. Never adjust the crown while submerged in water because it may leak into the case. It is best to remove your watch before taking a shower or bath and before entering a sauna or steam room because heat, soap and steam can prematurely age the water resistant seals.
Condensation under the crystal indicates that water has got into the watch and it must be checked as soon as possible.
For maximum accuracy and reliability, we recommend not wearing your watch when playing a potentially high-impact sport like tennis, golf, and horseback riding. Also, stay at least 10 cm away from highly magnetised objects like smartphones, tablet computers, induction hobs, speakers, TV screens, and airport security detectors. For more information about magnetisation, please read the Watchmaker's Advice section.
Watches equipped with a mechanical movement need to be manually wound to tighten up the mainspring that operates the movement. This is done by turning the crown clockwise until it stops turning, which means the movement is fully wound (approximately 25 full winds of the crown).
The watch has a power reserve of 100 hours. It must be manually wound when the power reserve runs out. To maintain the accuracy of your watch, we recommend winding the movement every day (approximately 12 full winds of the crown).
Before caring for your watch strap, we recommend checking that the crown is properly screwed down or pushed in.
Clean the strap with soapy water then rinse thoroughly. Dry with a soft cloth.
Watches are one of those rare objects that operate continuously. To preserve its reliability and extend its lifespan, your watch should be regularly serviced by our certified workshops equipped with all the necessary tools and parts. Only CHANEL watchmakers are officially qualified to repair and maintain your watch.
Recommended routine service schedule:
EVERY 2 YEARS: MAINTENANCE SERVICE (includes the following steps):
- Disassemble the watch
- Check the movement
- Replace the battery (quartz watches) or calibrate the movement (automatic watches)
- Disassemble and clean the watch with ultrasound
- Replace any damaged parts
- Reassemble the watch and replace water resistant seals
- Replace bars and screws, if necessary
- Test the water resistance
- Check the condition of strap and clasp
- Monitor operation of quartz watches for 48 hours, automatic watches for 72 hours, automatic chronograph models for 96 hours
EVERY 4-5 YEARS: FULL SERVICE (includes the following steps):
- Disassemble the watch
- Automatic movements: disassemble, clean, wind and calibrate the movement
- Quartz movements: replace movement and battery
- Disassemble the watch, replace any damaged parts
- Polish steel and gold parts
- Clean watch components with ultrasound
- Reassemble watch and replace water resistant seals
- Replace bars and screws, if necessary
- Test the water resistance
- Check the condition of strap and clasp
- Monitor operation of quartz watches for 48 hours, automatic watches for 72 hours, automatic chronograph models for 96 hours