quartz movement with date indicator beige gold tweed

boy·friend classic

video 1 - adjusting the time

1 of 3

1 of 3

1 of 3

similar videos

  1. Adjusting the time

  2. Adjusting the date

  3. Adjusting the size

TAKING CARE OF YOUR WATCH

BATTERY LIFE

3 years on average

MOVEMENT

Quartz

HOW OFTEN SHOULD YOU SERVICE YOUR WATCH?

Check water resistance every 2 years (every year if in frequent contact with water) 

Servicing every 4 to 5 years

 

Your watches water resistance features are engraved on the case back next to the fish marking.

This water resistance marking indicates the depth to which the movement is protected from dust, moisture, and any damage that may occur if it is submerged in water. Seals are used to make watches water resistant. To ensure continuous water resistance, we recommend replacing the seals every two years from the date of first use. It is also advisable to check the water resistance of your watch case every year if it has been exposed to seawater or pool water for long periods. Never adjust the crown while submerged in water because it may leak into the case. It is best to remove your watch before taking a shower or bath and before entering a sauna or steam room because heat, soap and steam can prematurely age the water resistant seals.

Condensation under the crystal indicates that water has got into the watch and it must be checked as soon as possible.

Go back to Water resistance
 

In quartz movement watches, the movement is powered by a battery that can last for 2-4 years, depending on the model. If the battery is completely discharged or low (the centre second hand on some watches will begin jumping four seconds faster), we recommend taking it to our expert watchmakers as soon as possible. Never leave a flat battery in your watch. It can leak and permanently damage the movement.

Go back to movement

 

Before caring for your watch strap, we recommend checking that the crown is properly screwed down or pushed in.

Clean the strap with soapy water then rinse thoroughly. Dry with a soft cloth.

Go back to THE STRAP
Servicing

Watches are one of those rare objects that operate continuously. To preserve its reliability and extend its lifespan, your watch should be regularly serviced by our certified workshops equipped with all the necessary tools and parts. Only CHANEL watchmakers are officially qualified to repair and maintain your watch.

Recommended routine service schedule:

EVERY 2 YEARS: MAINTENANCE SERVICE (includes the following steps):

  1. Disassemble the watch 
  2. Check the movement 
  3. Replace the battery (quartz watches) or calibrate the movement (automatic watches) 
  4. Disassemble and clean the watch with ultrasound
  5. Replace any damaged parts 
  6. Reassemble the watch and replace water resistant seals 
  7. Replace bars and screws, if necessary
  8. Test the water resistance 
  9. Check the condition of strap and clasp 
  10. Monitor operation of quartz watches for 48 hours, automatic watches for 72 hours, automatic chronograph models for 96 hours

EVERY 4-5 YEARS: FULL SERVICE (includes the following steps):

  1. Disassemble the watch 
  2. Automatic movements: disassemble, clean, wind and calibrate the movement 
  3. Quartz movements: replace movement and battery
  4. Disassemble the watch, replace any damaged parts 
  5. Polish steel and gold parts 
  6. Clean watch components with ultrasound
  7. Reassemble watch and replace water resistant seals
  8. Replace bars and screws, if necessary
  9. Test the water resistance 
  10. Check the condition of strap and clasp 
  11. Monitor operation of quartz watches for 48 hours, automatic watches for 72 hours, automatic chronograph models for 96 hours

Go back to servicing

*Suggested retail price. More information