Self-winding movement with date indicator

Video 1 - Screwing and unscrewing the crown

Video 2 - Adjusting the time

Video 3 - Adjusting the date

Video 4 - Winding the watch

Taking care of your watch



Power reserve

From 38 to 70 hours

How often should you service your watch?

Check water resistance every 2 years (or annually, if in frequent contact with water)
Full review every 4-5 years

  • Water resistance

    Your watch's water resistance features are engraved on the case back next to the fish marking.

    This water resistance marking indicates the depth to which the movement is protected from dust, moisture, and any damage that may occur if it is submerged at that depth. Seals are used to make watches water-resistant. To ensure continuous water resistance, we recommend replacing the seals every two years from the date of first use. It is also advisable to have our experts test your watch's water resistance every year if it has been exposed to seawater or pool water for long periods. Never adjust the crown while submerged in water because it may leak into the case. It is best to remove your watch before taking a shower or bath and before entering a sauna or steam room because heat, soap and steam can prematurely age the water-resistant seals.

    Condensation under the crystal indicates that water has got into the watch and it must be checked as soon as possible.

  • The movement

    For maximum accuracy and reliability, we recommend not wearing your watch when playing a potentially high-impact sport like tennis, golf, and horseback riding. Also, stay at least 10 cm away from highly magnetized objects like smartphones, tablet computers, induction hobs, speakers, TV screens, and airport security detectors. For more information about magnetization, please read the section Watchmaker's Advice.

    Your watch is equipped with a self-winding mechanical movement that winds itself with the movement of the wrist, which causes the oscillating weight to turn on its axis. The power reserve can be affected if the strap is not adjusted correctly, so it is important that your watch is properly fitted. When the watch is not being worn, it has a power reserve of 38 to 70 hours (depending on the model). It must be manually wound when the power reserve runs out.
    If the watch remains idle, we recommend winding it manually every two or three weeks (20-25 winds of the crown) so the movement's lubricating oils stay intact.

    Important: If your watch is equipped with a steel caseback, it is best not to adjust the date between 10 PM and 1 AM.

  • The strap

    If your watch has a leather strap, do not get your leather strap wet to avoid damaging it. We recommend replacing your strap every 2-4 years depending on how often it is used. Use only a clean and dry soft cloth to clean your strap. Do not use chemicals like soap, alcohol or solvents. Avoid contact with water.

    Before cleaning ceramic bracelets, make sure the watch's crown is properly screwed down or pushed in. Clean the bracelet with soapy water then rinse thoroughly. Dry with a soft cloth.

  • Servicing

    Watches are one of those rare objects that operate continuously. To preserve its reliability and extend its lifespan, your watch should be regularly serviced by our certified workshops equipped with all the necessary tools and parts. Only CHANEL watchmakers are officially qualified to repair and service your watch.

    Recommended routine service schedule:

    EVERY 2 YEARS: MAINTENANCE SERVICE (includes the following steps):

    1. Disassemble the watch
    2. Check the movement
    3. Replace the battery (quartz watches) or calibrate the movement (automatic watches)
    4. Disassemble and clean the watch with ultrasound
    5. Replace any damaged parts
    6. Reassemble the watch and replace water-resistant seals
    7. Replace bars and screws, if necessary
    8. Test the water resistance
    9. Check the condition of strap and clasp
    10. Monitor operation of quartz watches for 48 hours, automatic watches for 72 hours, automatic chronograph models for 96 hours

    EVERY 4-5 YEARS: FULL SERVICE (includes the following steps):

    1. Disassemble the watch
    2. Automatic movements: disassemble, clean, wind and calibrate the movement
    3. Quartz movements: replace movement and battery
    4. Disassemble the watch, replace any damaged parts
    5. Polish steel and gold parts
    6. Clean components with ultrasound
    7. Reassemble watch and replace water-resistant seals
    8. Replace bars and screws, if necessary
    9. Test the water resistance
    10. Check the condition of strap and clasp
    11. Monitor operation of quartz watches for 48 hours, automatic watches for 72 hours, automatic chronograph models for 96 hours